PNI HOUSE H804 Manual De Usuario página 5

1.1.1 Record config
Go to Main menu - Record - Record config (Record setup)
Set recording parameters on each channel or all channels at the same time. The system is set to
start recording 24 hours continuously.
Note: The HDD must be set to read / write mode.
Channel: Choose the channel number for which you want to set up the recording. Choose All to
make settings for all channels at the same time.
Redundancy: The function is not active for this model
Length: Set the length of each recording file (in minutes). The default is 60 minutes.
Pre-Record: Recorded between 1 and 30 seconds before an alarm event
Mode:
Set the recording type: programmed, manually, or off.
• Scheduled recording: You can choose 4 recording times (between 0:00 and 24:00 hours)
and 3 modes (normal recording, motion detection and alarm):
• Regular (normal recording): The device records in the set time. The video file type is "R".
• Detect: The device detects motion detection. Video file type is "M".
5
EN