Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the Light Bulb
Moving the control to COLD does not remove
power to the light circuit.
Screw
The bulb is located behind the shield
Hole
in the back wall.
Unplug the refrigerator.
Remove the shelves (if necessary).
Remove the screw.
Gently remove the light shield by
inserting a flat head screwdriver
Bulb
into the slot at the top of the shield
and pop it off.
Cover
Preparing for Vacation
For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
Replace the bulb with a 25W appliance
bulb with an E12 candelabra base.
NOTE: If the bulb is not available at your local
hardware store, contact GE customer service.
Insert the tab at the bottom of the light
shield into the light bulb housing and
snap into place.
Replace the screw.
Replace the shelves if removed.
Plug in the refrigerator.
Be sure the refrigerator stays in an upright
position during moving.
GEAppliances.com
7
Publicidad
