Descargar Imprimir esta página

Franke 340.0595.364 Manual Del Usuario página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140
SUCTION HOOD CONTROLS
Timer symbol.
After selecting the suction hood Digit, press the Timer Management Digit to set the countdown.
Grease filter maintenance symbol
The grease filter cleaning signal is displayed by LED
Press " 9 " on the power bar to set INTENSIVE 1 speed. This setting is timed to operate for 10 minutes.
"9"
Once this time has passed, the system will automatically return to the speed set previously. It is deactiva-
ted by selecting a different speed.
Press " 9 " on the power bar twice to set INTENSIVE 2 speed. This setting is timed to operate for 5
minutes. Once this time has passed, the system will automatically return to the speed set previously. It is
deactivated by selecting a different speed.
This function is only available if Automatic mode is deactivated. Automatic mode is deactivated by pressing
.
Delay
Press the suction hood Digit and set a speed on the power bar.
Press the Timer management Digit, which was displaying "CL" but will change to the countdown. This is
pre-set to 15 minutes.
Charcoal filter maintenance symbol
• The hood is set by default to ducting mode. Press the On/Off key. With no loads on, press
the Hood controls digit to enable the suction hood. Press and hold the Digit again for 5
seconds to:
Activate the charcoal filter:
• The charcoal (anti-odour) filter symbol lights up for 1 second and the device emits a double
beep.
Deactivate the charcoal filter:
• The charcoal (anti-odour) filter symbol flashes twice and the device emits a double beep.
Filter reset and reactivation
• After 200 hours of operation of the charcoal filter and 100 hours of the grease filter, the
coming on of the relative icons will signal that it is necessary to perform maintenance on the
indicated filter.
Having completed maintenance on the filter with the hob off, proceed as follows:
• Turn the hob On/Off
• Press the Hood digit
• Press key "A" for at least 5 seconds and wait for confirmation of the reset which will be
signalled by two beeps and the symbol disappearing.
• If the reset confirmation (double beep and symbol disappearing) does not occur within 6
seconds, turn off the hob and repeat the procedure from the beginning.
FMA 839 HI / FMA 839 HI LL KIT
to activate the numbered bar.
– 17 –
and it is always enabled.
EN

Publicidad

loading

Este manual también es adecuado para:

Maris fma 839 hi ll kitMaris fma 839 hi