Publicidad
Idiomas disponibles
Idiomas disponibles
EN
adhesives may result in
warping and detachment.
The kitchen unit must have
Z
sufficient space to allow
for electrical connection of
the device. Wall-mounted
units above the device must
be installed at a sufficient
distance to leave the space
required to work in comfort.
The use of decorative
Z
hardwood borders around
the worktop behind the
device is allowed, provided
the minimum distance
always complies with the
indications provided in the
installation drawings.
The minimum distance
Z
between the fitted device
and the rear wall is indicated
in the installation drawing for
the flush-fitted device (150
mm for the side wall, 40 mm
for the rear wall and 500
mm for any wall-mounted
units above it).
To avoid any infiltration of
Z
liquids between the hob
frame and the worktop,
position the adhesive seal
FMA 839 HI / FMA 839 HI LL KIT
provided along the whole
outer edge of the hob before
installation.
Proper use
The suction hood has been
Z
designed solely to eliminate
cooking fumes during
domestic use.
Never use the appliance
Z
for purposes other than
those for which it has been
designed.
Deep-fryers must be kept
Z
under constant supervision
when in use: the oil may
catch fire if it gets too hot.
Do not use the device with
Z
an external timer or separate
remote controlled system.
The device must never be
Z
installed behind a decorative
door, to prevent it from
overheating.
Never climb onto the device,
Z
as this may damage it.
Never place hot pots and
Z
pans on the frame, as this
may damage the silicon seal.
Never cut or prepare food
Z
on the vitreous ceramic
– 8 –
Publicidad
