Using The Vacuum Cleaner; Care And Maintenance - Kasanova KIV000011 Manual De Instrucciones

VACUUMCLEANER
12

USING THE VACUUM CLEANER

Unwinding and rewinding the cable
1. Unwind length of cable and insert the plug into the power socket. A
YELLOW mark on the power cable shows the ideal cable length. Do not
extend the cabel beyond the RED Mark.
2. To rewind the power cable, press the rewind button with one hand, and
guide the other hand to ensure that it does not whip causing damage
Vacuuming
1. Press the ON/OFF button to switch the appliance on. It is advisable to set
the speed control to MIN before switching the appliance on.
2. When vacuuming. Pull the cleaner behind you on its wheels.
3. The suction power can be regulated to suit the type of flooring. Adjustiong
the suction power by sliding the suction power control switch upward for
maximum power, downward for minimum power.
Opening the air inlet valve
It is easy to reduce the suction power for a short time, e.g. to prevent rugs or
other objects being sucked into the vacuum cleaner.
1. Open the air inlet valve far enough to reduce the suction power. The floor
brush will be easier to manoeuvre.
2. Close the valve up again when you are ready to use full power again.

CARE AND MAINTENANCE

Emptying the dust cup
Slide the release button and open the dust cup bottom
Empty the dust inside the dust cup.
Cleaning the filter
Take out the filter when it's getting dirty. Remove dust around the filter by
patting it gently or with brush.