Usage; Adjusting The Suction Power - SEVERIN 7050 Manual De Instrucciones

BC7050.book Seite 14 Montag, 4. April 2016 5:47 17

Usage

Assembly and changing of accessories
3 Usage
– Only attach appliance parts when the plug has been disconnected from the mains socket.
– Only use undamaged nozzles. Damaged nozzles can scratch surfaces. For additional tips re-
garding assembly and changing of accessories, see also illustrated Quick Start Guide.
Vacuuming
– Especially when vacuuming stairs, make sure that you are always above the appliance. Other-
wise the appliance may fall down and cause injuries.
– Only use the appliance with a dust bag and the filters. If there is no dust bag, the appliance cov-
er will not close.
– Follow the cleaning and maintenance instructions of the floor covering, carpet or furniture man-
ufacturer!
– When pulling in the power cable, hold the plug in your hand and slide it in the direction in which
the cable is winding. Otherwise the power cable can whip around, injure persons nearby, be-
come a stumbling hazard or take objects along with it.
For additional application tips, see also illustrated Quick Start Guide.

Adjusting the suction power

You may steplessly adjust suction power via the power regulator. You should adjust the power reg-
ulator position with respect to the floor to be cleaned:
– Maximum power: for hard floors with crevices, heavily soiled carpets
– High power: for carpets, rugs and the like
– Moderate power: for upholstery and mattresses
– Minimum power: for curtains, drapes and the like
14
‒
+