27404xx1
2
English
Technical Information
Flow rate
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output tempera-
ture can be no higher than 112° F.
• This showerhead is for use with automatic
compensating valves rated at 2.0 GPM (7.6
L/min) or less.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
Tools Required / Outiles Utiles
/ Herramientas Útiles
17 mm
2.5 GPM
2 mm