Publicidad
Idiomas disponibles
Idiomas disponibles
General Safety Rules
WARNING:
Read and understand all instructions. Failure to follow all instructions may result in electric shock, fire
and/or serious personal injury.
Read All Instructions
For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
Do not allow children or untrained individuals to use
this unit.
Do not start or operate the engine in a confined space,
building, near open windows, or in other unventilated
space where dangerous carbon monoxide fumes can
collect. Carbon monoxide, a colorless, odorless, and
extremely dangerous gas, can cause unconsciousness or
death.
Clear the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or loose string
which can be thrown or become entangled in the cutting
line or blade.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection
when operating this equipment.
Wear heavy, long pants, long sleeves, boots, and gloves.
Do not wear loose fitting clothing, short pants, sandals,
or go barefoot. Do not wear jewelry of any kind.
Heavy protective clothing may increase operator fa-
tigue, which could lead to heat stroke. During weather
that is hot and humid, heavy work should be scheduled
for early morning or late afternoon hours when tem-
peratures are cooler.
Never operate this unit on the operator's left side.
Secure long hair above shoulder level to prevent en-
tanglement in moving parts.
Keep all bystanders, children, and pets at least
50 ft. (15 m) away. Bystanders should be encouraged
to wear eye protection. If you are approached, stop the
engine and cutting attachment. If you are using a brush
cutter attachment, there is the added risk of injury to
bystanders from being struck with the moving blade in
the event of a blade thrust or other unexpected reaction
of the saw.
Do not operate this unit when you are tired, ill, upset, or
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach. Over-
reaching can result in loss of balance or exposure to hot
surfaces.
Safety Rules
Do not use on a ladder or unstable support. Stable foot-
ing on a solid surface enables better control of the unit
in unexpected situations.
Keep all parts of your body away from any moving
part.
To avoid hot surfaces, never operate the unit with the
bottom of the engine above waist level.
Do not touch area around the muffler or cylinder of the
unit, these parts get hot from operation. Contact with hot
surfaces could result in possible serious personal injury.
Always stop the engine and remove the spark plug wire
before making any adjustments or repairs except for
carburetor adjustments.
Inspect the unit before each use for loose fasteners, fuel
leaks, etc. Replace any damaged parts before use.
The cutting attachment should never rotate at idle dur-
ing normal use. The cutting attachment may rotate at
idle during carburetor adjustments.
It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may in-
clude tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smok-
ing, and work practices are all thought to contribute
to the development of these symptoms. It is presently
unknown what, if any, vibrations or extent of exposure
may contribute to the condition. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
a)
Keep your body warm in cold weather. When oper-
ating the unit wear gloves to keep hands and wrists
warm. It is reported that cold weather is a major
factor contributing to Raynaud's Syndrome.
b)
After each period of operation, exercise to increase
blood circulation.
c)
Take frequent work breaks. Limit the amount of
exposure per day.
d)
Keep the tool well maintained, fasteners tightened,
and worn parts replaced.
If you experience any of the symptoms of this condi-
tion, immediately discontinue use and see your physi-
cian about these symptoms.
Mix and store fuel in a container approved for gasoline.
5
Publicidad
