Kärcher 1.042-502.0 Manual Del Usuario página 19

Danger due to flung objects. Keep a safe dis-
tance away.
Do not subject the device to rain or moist
conditions.
Do not use saw blades or metal blades.
The guaranteed sound level specified on the
label is 94 dB.
Pull: Quick release for carrying belt
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page
Illustration A
Cutting blade
1
String reel
2
Unlocking string reel
3
Lower shaft
4
Upper shaft
5
Front handle
6
Eyelet for carrying belt
7
Rear handle
8
Battery pack unlocking button
9
Trigger
10
Trigger lockout button
11
Switch speed
12
Type plate
13
String guard
14
*Battery Pack Battery Power 36V
15
*Quick Charger Battery Power 36V
16
Carrying belt
17
* optional
Rechargeable battery pack
The device can be operated with a Kärcher 36 V Bat-
tery Power battery pack.
Installing the string guard
WARNING
Blade on the string guard
Incision injuries
Install the string guard before using the device for the
first time.
WARNING
Exposed string
Incision injuries
Never use the device without the string guard.
Illustration B
The string guard must face the operator.
1. Insert the string guard into the bracket.
2. Screw the string guard to the bracket.
Mounting the string reel
When assembling the components, make sure that the
side recesses match.
1. Assemble the sprocket.
Illustration C
2. Mount the string guard cover.
3. Insert a tool (e.g. screwdriver) through the recesses
on the side to prevent the support from rotating.
Illustration D
4. Mount the string reel.
1. Connect the upper and lower shaft segments.
Illustration E
Installing the front handle
1. Screw the front handle to the upper shaft section at
the desired height.
Illustration F
Installing the battery pack
1. Push the battery pack into the mounting in the de-
vice until it audibly latches into place.
Illustration G
Inserting the carrying belt
1. Place the belt over one shoulder.
Illustration H
2. Push the hook of the carrying belt into the eyelet on
the shaft.
Working techniques
CAUTION
Obstacles in the mowing area
Risk of injury and damage
Before starting mowing, check the work area for objects
that may be flung away, e.g. wires, stones, cords or
glass.
1. Fold back the trigger lockout button to the rear.
Illustration I
2. Press the trigger.
The device starts up.
3. Use the speed switch to select the desired speed.
Illustration J
4. Guide the cutting head parallel to the ground.
5. Guide the device in a semi-circular movement over
the cutting area.
English
Installation
Installing shaft
Initial startup
Operation
19