Publicidad
Idiomas disponibles
Idiomas disponibles
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
Fault
The device does not start
up
The device stops during
operation
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Device performance data
Working voltage of the battery
Working width
Cutting string, diameter
Max. speed
Determined values in acc. with EN 50636-2-91
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
+
WA
Uncertainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Weight (without battery pack)
Subject to technical modifications.
Troubleshooting guide
Cause
Battery pack is not inserted correctly.
Battery pack is empty
Battery pack is defective.
String is too long and is causing the mo-
tor to overload
Cutting head blocked by cutting residue Remove the cutting residue.
Motor is overloaded
Motor has overheated
The battery has overheated
V
36
mm
380
mm
1,65
/min
5600 ±
10%
dB(A) 79,6
dB(A) 3,0
dB(A) 94
2
m/s
3,4
2
m/s
2,1
dB(A) 1,5
mm
1773 x 366
x 277
kg
4,0
As the battery pack ages, even if it is looked after, its ca-
pacity reduces such that the full run time will no longer
be reached when fully charged. This does not indicate a
defect.
Rectification
Push the battery pack into the mounting
until it latches into place.
Charge the battery pack.
Replace the battery pack.
Install the string guard.
The string will automatically be shortened.
Mow only suitable cutting material, see
Chapter Intended use.
Stop working and allow the motor to cool
down.
Stop working and allow the battery to cool
down to normal battery temperature.
Vibration value
WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Device with a hand-arm
vibration value > 2.5 m/s² (see
chapter Technical Data in the
operating instructions)
CAUTION ● Uninterrupted
use of the device for several
hours can lead to numbness.
● Wear warm gloves to protect
your hands. ● Take regular
breaks from work.
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Battery-powered grass trimmer
Type: 1.042-502.x
Currently applicable EU Directives
2000/14/EC (+2005/88/EC)
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
English
21
Publicidad
