Publicidad
Idiomas disponibles
Idiomas disponibles
DEVICE INSTALLATION AND CONFIGURATION
Device installation
The device can be installed on the wall or to cover the 3-module fl ush-mounting box
(type 503).
We recommend positioning at a height of 1.5 meters from the fl oor, in an area that
respects as much as possible the average temperature conditions of the entire
environment. Make sure that the distance between the Access Point and the device is
such as to guarantee stable communication.
Avoid installation near doors or windows, in niches, behind doors and curtains or
in positions with excess or total lack of ventilation, to avoid that the reading of the
temperature measured by the probe is in some way offset.
Preliminary operations
If you intend to use the device by remote control, before proceeding with the
installation and confi guration make sure you have a Orbis account available.
To create a Orbis account,
proceed as follows:
1. Install and start the "TUO" app
on your smartphone (or tablet)
2. Choose "Register" and fi ll in the "e-mail"
and "password" fi elds
Note: for security reasons it is
recommended to choose a password
different from the one used to access
your e-mail box
3. Check your e-mail box: confi rm the
activation of the account by clicking on
the link contained in the e-mail sent
by the system
4. Log in by entering the e-mail address
and password chosen in the registration
process
E-Mail
Password
- 46 -
OB327000 Chronothermostat User Manual
TUO
Enter
Forgot password?
Forgot password?
Register
Register
Sign In
Publicidad
