Publicidad
Idiomas disponibles
Idiomas disponibles
In order to extend the battery life, the keypad is active only when the backlighting is on.
To activate the keypad, you need to press the key SET. The keypad remains active
as long as the backlighting is turned on.
This operation is not shown in the procedures described here below in this user
manual, but the user must take it into account every time he intends to use the
device keypad.
The "energy saving" function is useful for extending the life of the batteries because
it allows you to set the frequency with which the device connects to the Orbis Server to
download any programming updates.
The basic setting (factory configuration) requires the device to log in to the cloud:
• in the winter period (from October 1st to April 30th) once every 15 minutes
in the time slot from 6:00 to 24:00 and once every hour in the time slot
from 24:00 to 6:00
• in the summer period (from May 1st to September 30th) once every 8 hours
This setting should ensure the ideal compromise between battery life and parameters
update frequency, but can be customized by the user using the app "TUO"
(see page 55).
It is important to keep in mind that any programming update can be received
only by the device only at the next programmed connection to the cloud.
If the user is close to the device, he can still force a connection by pressing
the key
for at least 3 seconds until the symbol
IMPORTANT USAGE NOTES
- 43 -
OB327000 Chronothermostat User Manual
starts flashing.
3s
Publicidad
