THE LED DISPLAY
The LED display shows the temperature settings,
dispenser options, water filter, door alarm, and
locking status messages.
1
DISPENSER SELECTION INDICATOR
Shows Cubed ice or Crushed Ice selection
that will be dispensed when the push switch
is pressed.
2
FREEZER TEMPERATURE
Indicates the set temperature of the freezer
compartment in Celsius or Fahrenheit.
3
REFRIGERATOR TEMPERATURE
Indicates the set temperature of the refrigerator
compartment in Celsius or Fahrenheit.
4
ICE PLUS
When the ICE PLUS/ENERGY SAVING button is
pressed, the display will indicate the selected
function has been activated.
5
DISPENSER LIGHT INDICATOR
When the LIGHT button is pressed,
the display will indicate the selected function:
The dispenser light is on, this indicator will
appear on the display panel.
DOOR ALARM INDICATOR
6
This indicator shows that the door-open
warning alarm is activated.
ENERGY SAVING
7
This indicater shows that Energy Saving mode is
activated.
8
WATER FILTER STATUS
This indicator shows the current status for
the water filter. See Resetting the Filter Indicator.
LOCK STATUS
9
This indicator shows the current status for
the control panel functions is set to LOCK.
22
1
2
3
4
5
6
wCAUTION
Display mode setting and its cancellation
• With the refrigerator door open, keep pressing the
REFRIGERATOR button and ICE PLUS/ENERGY
SAVING button more than 5 seconds, then it goes
to the display mode.
• Perform the same way again to cancel the display
mode.
• All freezing units do not work at the display mode.
7
8
9