Anker NEBULA Capsule Pro Manual Del Usuario página 14

EN
[Auto Keystone
Correction]
[Keystone Correction]
[Projector mode]
4. App Manager
① Press
[Settings] > [App Manager] and press
② Select an app and check the current version, open
or force stop, check the storage used or clear data, or
uninstall it.
When more than 3 apps are installed, you can
T
select [All] at the bottom line of the home page
to enter the [Apps] page. Select an app and
press
can select [Move To Home] or [Uninstall].
12
Enable / disable auto
keystone correction.
Correct keystone manually.
Default value is 0.
[Front]: The device is located
in front of the projection
surface.
[Rear]: The device is located
behind the projection surface.
[Front Ceiling]: The device
is hanging from the ceiling
in an upside down position.
The image is rotated by 180
degrees.
[Rear Ceiling]: The device
is hanging from the ceiling
in an upside down position
behind the projection
surface. The image is
rotated by 180 degrees and
horizontal mirrored.
to access the home menu, select
in the remote control, and then you
.