Home Decorators Collection 52-WWDO Manual De Instrucciones página 13

Assembly - Installing the Light Kit (continued)
12
Installing shatter resistant bowl
WARNING: Do not overtighten when installing the shatter
resistant bowl into the light kit assembly. Allow the bowl to cool
completely before removing.
□
Place the shatter resistant bowl (I) into the light kit pan (E),
aligning the three flat areas on the top flange of the shatter
resistant bowl (I) with the three raised dimples in the light kit
pan. Turn the shatter resistant bowl (I) clockwise until it stops.
□
Attach the pull chain extensions (CC) to the fan pull chains.
Operation of your fan
NOTE: Wait for the fan to stop before reversing direction of the
blade rotation.
The pull chain controls the fan speed as follows:
1 pull -High, 2 pulls -Medium, 3 pulls -Low, and 4 pulls -Off
Speed setting for warm or cool weather depend on factors such
as room size, ceiling height, number of fans, and so on.
The slide switch (V V) controls the direction: forward (switch left)
or reverse (switch right).
A. Warm weather - (Forward) A downward airflow creates a
cooling effect. This allows you to set your air conditioner on a
higher setting without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off
of the ceiling. This allows you to set your heating unit on a lower
setting without affecting your comfort.
13
Please contact 1-800-986-3460 for further assistance.
G
E
I
CC
A. Warm weather
VV
B. Cool weather
VV
HOMEDEPOT.COM/HOMEDECORATORS