MAINTENANCE
The unit should be cleaned periodically to ensure the optimum performance, the smudginess can decrease the life of light and the
output of light is affected by the dust which can make the machine overheating. In general, make the maintenance at least two
times a month. Be sure to power off the unit before cleaning .
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens tissue or soft cotton cloth
with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty surrounding can cause
greater accumulation of dirt on the optics. Never rub or press strongly on the panel.
DMX Channel Summary- 12 Channels Mode
CHANNEL VALUE FUNCTION
1
1~255
2
1~255
3
1~255
4
1~255
0~10
5
11~255 All dimming adjustment from dark to bright
6
1~255
7
1~255
8
1~255
9
1~255
0~9
10
10~255 Adjust mixed color
0~9
11
10~255 Adjust strobe from slow to fast
0~127
12
128~255 Open sound active
0
Stop
Adjust Pan motor movement
0
Stop
Adjust Pan motor fine
0
Stop
Adjust Tilt motor movement
0
Stop
Adjust Tilt motor fine
Close
0
Close
Red color adjustment from dark to bright
0
Close
Green color adjustment from dark to bright
0
Close
Blue color adjustment from dark to bright
0
Close
White color adjustment from dark to bright
Close
No strobe
Close sound active
www.beamzlighting.com