Publicidad
Idiomas disponibles
Idiomas disponibles
results with all RF energy levels,
but, for lower levels, it will
take more time to reach the
effective temperature.
Getting Started
Step 1: Prepare your skin
1. Prior to use, make sure your
skin is dry, clean and free of
topical products such as:
moisturizers, liquids or lint.
2. Make sure you remove all
jewelry from the treatment
area and from your hands.
3. Never use flammable
liquids such as alcohol
(including perfumes,
sanitizers, or other
applications containing
alcohol) or acetone on the
skin one hour before using
the device as it may cause
burning of the skin.
4. The device is suitable for
men. However, male users
should make sure their skin
is clean-shaven before
treatment.
Step 2: Device Operation
Note: A preliminary test should
be conducted separately for
each area you intend to treat
before proceeding with a full
treatment in that area. See
Preliminary Test section above.
1. Make sure the device is
clean, dry and intact prior
to use.
2. Apply an even layer of the
Base Gel on the area you
intend to treat.
3. Set the Radio Frequency
(RF) energy level to the
level you selected in your
preliminary test treatment.
Touch the RF energy level
selection button repeatedly
until you reach the desired
level: 1, 2, or 3.
4. The device is equipped
with 2 safety sensors which
will keep the temperature
in the effective and safe
range throughout the entire
treatment.
Note: The device stops
the heating when
desired temperature is
achieved; heating is then
13
Publicidad
