Publicidad
Idiomas disponibles
Idiomas disponibles
re-activated when the
temperature beings to
drop.
5. Place the treatment fingers
on the intended area,
ensuring full contact with
your skin during the entire
treatment. The device
will indicate the proper
skin contact by the green
status light. If the device is
not properly placed, the RF
energy will not be delivered.
6. If you do not feel
sensations of warmth after
approximately 10 seconds,
try moving the device on
a smaller treatment area
and/or increasing the RF
energy.
7. Move the device on the
treatment area in a slow,
circular or back and forth
motion while constantly
and firmly staying in
contact with the skin.
8. See treatment areas,
treatment time and
treatments schedule in the
Recommended Treatment
section.
14
9. After completing the
treatment, wipe off the
remaining Base Gel from
the treated area.
10. Cleaning instructions for
before and after treatment
are depicted in the
Cleaning & Storage section.
Publicidad
