Publicidad
14. Clean the air filter regularly. The frequency of cleaning depends on the cleanliness of the
air.
15. After turning off the machine, wait at least 5 minutes before turning it back on.
16. Do not use the device in sunny places. When the device overheats, the overheat
protection will switch on the device.
17. To ensure effective cooling, a distance of at least 50 cm should be kept between the side
walls of the device and the wall or furniture or curtains.
18. Due to the limited performance of the device, if the difference between the target
temperature and the ambient temperature is too great, the target temperature may not be
reached.
19. To reduce the risk of fire, electric shock or injury when using the air conditioner, observe
the following basic precautions:
a) Connect to a grounded outlet with 3 pins.
b) Do not remove the grounding prong.
c) Do not use the adapter.
d) Do not use an extension cord.
e) Disconnect the air conditioner before servicing.
f) Use two or more people to move and install the air conditioner.
20. Do not use agents accelerating the defrosting or cleaning process other than those
recommended by the manufacturer.
21. The device should be stored in a room without constantly operating sources of ignition,
for example: open fire, gas appliances or electric heaters.
BEFORE FIRST USE
When moving the device make sure that it is in an upright position. Before using the air conditioner keep it upright for 2 hours at least.
Device Description - LOCAL AIR CONDITIONER CR7929 - Picture A
1. Control panel
3. Remote controller (picture E)
5. Air inlets
7. Exhaust connector
9. Window exhaust adapter
11. Filter's frame
13.Drain plug
Control Panel Description - Picture D.
A. Power button
C. Temperature down / timer down button in cooling mode
D. Temperature up / timer up button in cooling mode
E. Sleep model button
F. Fan mode button
G. Timer button
H. Automatic air oscillation button
I. LED screen
J. Cool mode button
K. Dehumidifying button
L. Slow fan speed button
M. Fast fan speed button
N. Water full indicator light
Remote controller – Picture E
A. Power button
B. Mode selection button
2. Cold air outlet
4. Handle
6. Air exhaust pipe
8. Drain hole with rubber cap (picture F)
10. Connector of air exhaust pipe
12. Nylon filter
5
Publicidad
