Esoteric AB-T1KD1 Manual Del Usuario página 5

Installation procedures
If the motor unit has been installed, follow
the procedures beginning on page 19 of the
Grandioso T1 Owner's Manual to remove it
before installing the arm base kit.
1
Remove the top of the leg
from the base unit.
Top of the leg
At the location where you want to
install the tonearm, turn the top of the
leg counterclockwise and remove it.
o Tonearms can be installed in three
locations: the back right, the back
left and the front left.
ATTENTION
IT-345 tonearms cannot be installed on
the front left.
2
Install the arm base post on
the base unit.
Referring to "Arm base post installation
diagram" on page 7, attach the arm
base post with the attachment screws.
3
Install the arm base.
Align a positioning indentation on the
underside of the arm base with the pin
on the arm base post when installing it.
The two different positioning indenta-
tions are for IT-345 and IT-407 tonearms.
Select the indentation to use according
to the tonearm being installed.
Continued on the next page
Pin
5
e