Esoteric AB-T1KD1 Manual Del Usuario página 6

Installation procedures (continued)
Positioning indentation
for IT-345
Positioning indentation
for IT-407
When placed correctly, the tops of the
arm base and the arm base post should
be almost the same height.
If there is a large height difference
between the arm base and the arm
base post, the positioning indentation
and the pin might not be aligned. Try
installing the arm base again.
4
Fix the arm base in place.
Tighten the arm base attachment
thumbscrew to fix it in place.
o After fixing it in place, confirm that
there is no looseness in the arm base.
6
5
Attach the tonearm to the
arm base.
Refer to the tonearm owner's manual
for installation procedures.
When not using a VTA elevator, insert
the adapter included with this kit into
the hole in the arm base before install-
ing the tonearm.
6
Install the motor unit.
Following the instructions starting
with procedure 10 on page 16 of the
Grandioso T1 Owner's Manual, install the
motor unit.
Adapter