Trevi XR 190 BT Guia Del Usuario página 10

BASIC OPERATION
To turn on the speaker, use the on / off switch (13).
Press the MODE button (1) to choose between:
- Bluetooth mode.
- Micro SD mode, if there is a Micro SD memory in the slot (14) the unit will
start playing music automatically.
- USB mode, if there is a USB type memory in the jack (16) the unit will start
playing music automatically.
- Radio mode.
- AUX IN mode.
VOLUME ADJUSTMENT
Turn the VOLUME knob (20) to adjust the volume.
BLUETOOTH OPERATION
COUPLING TO THE DEVICES
1. Place the speaker near the Bluetooth device to be paired.
2. Turn on the speaker and select the Bluetooth mode (the 17 indicator flashes).
3. Search for and pair the speaker named "XR 190 BT" and enter the PIN
"0000" if required.
4. Once paired, a short acoustic signal will sound and you can play the music
tracks.
5. To disconnect the connected device and connect another one, long press the
REP / CH button (2).
Note:
- The Bluetooth speaker works only with one connection at a time, the
connection can not be interrupted during normal operation.
- When Bluetooth pairing with external devices fails, delete another one
Bluetooth device in the connection list, restart the Bluetooth speaker and look
again for the signal.
COMMANDS AVAILABLE IN BLUETOOTH MODE
- To start music playback, start it from your device.
- Press the (6) key once to move to the previous track, press the (8) key once
to move to the next track.
- Press the button (7) to pause, press it again to resume music reproduction.
When connected to a telephone, when a call is received, playback is interrupted
and then resumed automatically at the end of the conversation.