KWC AQUA420 Instrucciones De Montaje Y Uso página 5

5. Application
The electronic siphon control unit allows an intelligent, automated and concealed
triggering of flushing with the highest possible hygiene standards and cost-effective
efficiency.
The electronic siphon control unit is a mains-operated urinal flushing system.
The start and end of urination are reliably detected.
6. Technical specifications
Minimum flow pressure:
Recommended flow pressure:
Maximum operating pressure:
Calculated flow rate:
Volumetric flow:
Flush time:
Operating voltage:
Power consumption:
Switching output:
Protection class:
7. Scope of delivery
Pos. Quantity
1
2
3
4
5
6
7
8
x
Name
1 Sensor
1 Siphon
2 Seals
1 Solenoid valve with closeable water volume regulator
1 Power supply
1 Control unit
1 G1/2 and G1/2 hose connections
1 G1/2 and G3/4 hose connections
1 Installation and operating instructions
1.0 bar
1-5 bar
10 bar
0.30 l/s
0.50 l/s at a flow pressure of 3 bar
Adjustable from 4-15 seconds
230 V AC
0.5 VA
Bistable RPE solenoid valve 6 V
Solenoid valve IP40
IP65 power pack
IP65 sensor
IP55 control unit
- 5 -