AmazonBasics B00ZQ4JQAA Manual Del Usuario página 8

1. Plug the USB connector on the cable
that came with your device into the input
port on your device first, then plug the
other end of the cable into the one of the
output ports on your power bank.
Notes:
• You can charge two devices at the
same time as long as the total power
requirement for the devices is not
greater than 5V/3.4A.
• We recommend that you use the
charging cable that came with your
device or the micro USB cable that
came with your power bank to charge
your device. Using other cables may
significantly reduce the charging speed
(or prevent you from charging).
2. If you want to stop charging your device,
press and hold the power button for 2
seconds and turn off your device.
Charging stops and the LEDs turn off.
Press the power button again to resume
charging.
8