Amprobe AMB-50 Manual De Uso página 20

2. Follow the on-screen installation instructions.
Note: Select "AMB-50" if you are asked to select which program to be installed.
Otherwise continue to proceed with the on-screen installation instruction
3. The installation program will automatically create a AMB-50 folder and create a AMB-50 Interface
Software short-cut on your desktop.
C. Use AMB-50 Interface program
1. Connect the USB Interface Cable to the Meter (connection port besides DC power adaptor connector on
the Meter) and connect the other end of USB Interface cable to the computer.
2. From the Windows Start menu, choose Programs > DMM > AMB-50 or double click AMB-50 shortcut on
desktop.
3. Press USB button on the Meter (USB symbol will display on the upper-right corner of the screen on the
Meter).
4. Click "USB CONNECT" from menu bar to establish the connection, the icon
5. Click EXIT to close the software
14
will be displayed.