VELTIUM LITE Zero Guía De Usuario página 37

4- COMMUNICATING WITH THE
CHARGER
The VELTIUM App is the interface for using, configuring and consulting the LITE charger.
However, the VELTIUM App can communicate with the charger in two ways:
BLUETOOTH COMMUNICATION
• Once the charger has been associated to a VELTIUM user account (see the 1. GETTING
STARTED section of this USER GUIDE), the charger will automatically connect to the VELTIUM
App provided that you are within the Bluetooth range (8-10 metres) and that the App is at
least running in the background of your mobile phone, i.e. it has not been closed.
• The Bluetooth connection only allows one user to connect to the charger at any given
time; this means that if more than one user has the VELTIUM App running within the
Bluetooth range, only one of them (the first one detected by the charger) will be connected
to it.
INTERNET COMMUNICATION
*
Only LITE Uno and
LITE Kubo chargers
There are two different ways to connect the charger to the internet:
• Wi-Fi: check that the signal of the Wi-Fi network to which you want to connect the charger is
strong enough at its installation point. Consult the 7.1 SETTINGS section of this USER GUIDE
for instructions on how to configure Wi-Fi communication.
• Local network: check that the charger is connected to the local network by Ethernet cable,
and that the router and other elements (switch, etc.) of said network have a power supply and
are working correctly. Consult the 7.1 SETTINGS section of this USER GUIDE for instructions
on how to configure communication using the local area network.
· Once the charger is connected to the Internet you can either perform operations or consult
information remotely and in real time.
· In the event of the user being near the charger, meaning that it can choose to connect with
either Bluetooth or the Internet, the App will choose to connect using Bluetooth.
· If the Wi-Fi or data network signal is weak or intermittent, or the Internet service provider
server fails, the information you will see on the VELTIUM App may be incomplete or out of date,
and you may even be unable to communicate with the charger.
If you have difficulty connecting the VELTIUM App to the charger using
BLUETOOTH, consult the 8. TROUBLESHOOTING section of this USER
GUIDE.
For security reasons, the charger settings can only be changed if you are
connected to the device by Bluetooth, never remotely.
7