Ravelli RBV 710 COMPACT Manual De Uso Y Mantenimiento página 55

Wiring
Preliminary Operations
Connect the power cord to the back of the stove and then to a wall socket. The I/O switch in the figure
should be set to I to power the stove. If voltage is not supplied check the state of the fuse installed in
Wiring
the box below the switch (4A fuse). During the periods of inactivity, we recommend you disconnect the
power cord of the stove.
Connect the power cord to the back of the stove and then to a wall socket. The I/O switch in the figure
should be set to I to power the stove. If voltage is not supplied check the state of the fuse installed in
the box below the switch (4A fuse). During the periods of inactivity, we recommend you disconnect the
What to check befor turning on the stove
power cord of the stove.
Make sure you have removed all parts that pose the risk of burns from the combustion chamber or glass (various instructions or
stickers). NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
Before turning on the stove, make sure you have fitted the grate on the support base and check that the door and the ash drawer What to check befor turning on the stove
COMPLYING WITH THE SPECIFICATIONS BELOW
are properly close. Make sure you have removed all parts that pose the risk of burns from the combustion chamber or glass (various instructions or
stickers).
How to load the pellets
Before turning on the stove, make sure you have fitted the grate on the support base and check that the door and the ash drawer
Fuel supply consists in the insertion of pellets from the top of the stove, by opening the door. During pellet loading prevent the pel-
are properly close.
let bag from coming into contact with hot surfaces.
How to load the pellets
Fuel supply consists in the insertion of pellets from the top of the stove, by opening the door. During pellet loading prevent the pel-
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
let bag from coming into contact with hot surfaces.
COMPLYING WITH THE SPECIFICATIONS BELOW
NEVER INSERT INTO THE TANK OTHER KIND OF FUEL OTHER FROM THE PELLETS
Description of the handheld set:
COMPLYING WITH THE SPECIFICATIONS BELOW
The handheld set is shown in the picture below:
Controls and use
Description of the handheld set:
1
Description of the handheld set:
The handheld set is shown in the picture below:
The handheld set is shown in the picture below:
2
1
3
1
2
2
3
3
The information below will allow you to become familiar with the product and achieve the best performance.
The information below will allow you to become familiar with the product and achieve the best performance.
The information below will allow you to become familiar with the product and achieve the best performance.
How to insert the batteries in the handheld set:
How to insert the batteries in the handheld set:
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries (mini
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries
How to insert the batteries in the handheld set:
pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover as shown
(mini pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover
Remove the protective cover of the battery on the back of the remote control as shown in Figure A, and insert the 3 batteries
in figure B
as shown in figure B
(mini pen style battery AAA 1.5V) in the housing of the handheld set and observe the poles. Install the battery protective cover
as shown in figure B
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
The handheld set, after a short screen showing the Ravelli logo, will list the languages available in the menu.
Select the desired language using the scroll keys and confirm your selection with the confirmation button. Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Select the desired language using the scroll keys and confirm your selection with the confirmation button.
Handheld touch radio initialization
In order to operate correctly, the handheld set should be interfaced with the electronic board installed inside the stove. For this
reason, on display appears the following message:
User's manual HANDHELD TOUCH RADIO
Use and maintenance manual RBV 710 COMPACT
4
5
6
Figure A
Figure A
Figure A
ITALIANO
DEUTSCH
ENGLISH
FRANCAIS
DANSK
NEDERLANDS
ESPANIOL
1
4 Increase button "UP" (selection key)
2 Decrease key "DOWN" (selection key)
5
3
ON/OFF or reset from "Sleep" mode key.
4 Display
1
Increase button "UP" (selection key)
6
5 Key for accessing the MENU and back
2 Decrease key "DOWN" (selection key)
1
4 Increase button "UP" (selection key)
6
Confirmation key
3
ON/OFF or reset from "Sleep" mode key.
2 Decrease key "DOWN" (selection key)
4 Display
5
3 ON/OFF or reset from "Sleep" mode key.
In "Sleep" mode, the handheld set
5 Key for accessing the MENU and back
4 Display
screen is obscured, keeping however
6 Confirmation key
6
active the radio communication with
5
Key for accessing the MENU and back
the stove to reduce battery con-
6 Confirmation key
In "Sleep" mode, the handheld set
sumption.
screen is obscured, keeping however
active the radio communication with
In "Sleep" mode, the handheld set
the stove to reduce battery con-
screen is obscured, keeping however
sumption.
active the radio communication with
the stove to reduce battery con-
sumption.
Pag.19
Rev.1 14/02/18
Page 55
EN
Figure B
Figure B
Figure B