Sauder Shoal Creek 409795 Instrucciones De Montaje página 7

Step 3
Turn four BLACK 9/16" FLAT HEAD SCREWS (II) into the
å
ENDS (A and B) until the shoulders of the SCREWS rest
on the surfaces of the ENDS.
Slide the END MOLDINGS (M72) onto the ENDS (A and B).
å
Line up the grooves in the MOLDINGS over the heads of
the SCREWS in the ENDS.
These edges
should be even.
www.sauder.com/services
B
M72
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
A
Shoulder
II
409795
These edges
should be even.
M72
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Page 7