Publicidad
Idiomas disponibles
Idiomas disponibles
DO914K
PARTS
1. Freezer compartment
2. Thermostat and light
3. Glass shelf
4. Vegetable drawer
5. Door balcony
6. Levelling feet
REVERSING THE DOOR
Caution:
•
Make sure that the appliance is empty and disconnected from the power net.
•
To reverse the door, you need to tip the appliance backwards. Make sure that the
appliance can lean on something firm and stable, so that it does not slip away
while reversing the door.
•
All removed objects are still needed to reinstall the reversed door.
•
Do not lay the appliance flat, this could damage the cooling system.
•
It is recommended to execute the assembly with 2 people.
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to avoid
scratch.
4. Unscrew bottom hinge of freezer door. Then remove the door and place it on a
soft pad to avoid scratch.
5. Move door lock from left side to right side. Move the two middle hole covers
from the one side to the other.
6. Move hinge hole cover from right side to left side.
7. Rotate freezer door and place hinge side at left side. And then fix the door by
holder.
8. Unscrew bottom hinge. Then remove the adjustable feet from both side.
9. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
10. Fit the bracket fitting on the left side and install the bottom hinge pin. Replace
both adjustable feet.
11. Place the door back on. Ensure the door is aligned horizontally and vertically, so
that the seals are closed on all sides before finally tightening the top hinge.
12. Put the top cover and fix it with 2 screws on the back.
1
2
3
4
6
42
5
5
5
Publicidad
