Toro Flex-Force Power System 60 Manual Del Operador página 19

Troubleshooting
Perform only the steps described in these instructions. All further
inspection, maintenance, and repair work must be performed by an
authorized service center or a similarly qualified specialist if you cannot
solve the problem yourself.
Problem
The battery pack loses
charge quickly.
The battery charger is not
working.
The LED indicator light on
the battery charger is red.
Possible Cause
1. The battery pack is over
or under the appropriate
temperature range.
1. The battery charger
is over or under
the appropriate
temperature range.
2. The outlet that the
battery charger is
plugged into does not
have power.
1. The battery charger
and/or battery pack
is over or under
the appropriate
temperature range.
17
Corrective Action
1. Move the battery pack
to a place where it is
dry and the temperature
is between 5°C (41°F)
and 40°C (104°F).
1. Unplug the battery
charger and move it to
a place where it is dry
and the temperature
is between 5°C (41°F)
and 40°C (104°F).
2. Contact your licensed
electrician to repair the
outlet.
1. Unplug the battery
charger and move the
battery charger and
battery pack to a place
where it is dry and the
temperature is between
5°C (41°F) and 40°C
(104°F).