Publicidad
Idiomas disponibles
Idiomas disponibles
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
After each cleaning, all parts should be thoroughly dried before the device is reused.
d)
Store the unit in a dry and cool place protected from moisture and direct sunlight.
e)
Clean the machine before placing it in storage.
f)
Keep the machine out of the reach of children and unauthorized persons.
g)
Do not spray the unit with a stream of water or immerse it in water.
h)
Make sure that no water enters through the ventilation openings in the casing.
i)
Clean the ventilation openings with a brush and compressed air.
j)
Perform regular inspections of the unit checking technical fitness and any damages.
k)
Check that nuts and bolts are tightened and the general condition before each use.
l)
Regularly lubricate the surface of the pusher piston boom and gear wheel. Lubricate all other parts
with a small amount of oil to avoid rust.
m) The tension of the drive belts should be checked regularly, especially after the first operation.
n)
Use a soft cloth for cleaning.
Disposal of used devices
At the end of its useful life, this product should not be disposed of with normal household waste but should be
taken to a collection point for the recycling of electrical and electronic equipment. This is indicated by the
symbol on the product, operating instructions, or packaging. The materials used in this appliance are recyclable
according to their marking. By reusing, recycling, or applying other forms of use of waste machines, you make
a significant contribution to the protection of our environment.
Your local administration will provide you with information about the appropriate disposal point for used
appliances.
Publicidad
