Pur Line VENTY TA Li Manual De Instrucciones página 38

How to disassemble the front guard
How to installation the front guard
It cannot use
water to rinse
the fan, it can
uses a dry cloth
to wipe.
DE
The front guard
in the normal
operate status
36
Make sure the fan is switch off and the blade is
stop to turn.
Check the position of installation mark, two
marker lines should be aligned.
Hold the margin of guard, and counterclockwise
rotation for 7.5°
The front guard can use
a clamp cloth or water to
rinse and wipe.
When the lock is opened, the front guard can be
take it out and clean the dust.
The front guard can be clean, and dried before
assemble. No parts expect the front guard
cannot use water to rinse. To prevent the water
will drop into the fan to happen short-circuit.
Please use the dry towel to clean those parts.
Reassemble in reverse order after the clean.