WARNING
Specific information on appliances with refrigerant gas R 290.
Please read all warnings carefully.
When defrosting and cleaning the device, do not use any tools other than those recommended
by the manufacturer.
The appliance should be placed in an area without continuous sources of ignition (for example:
open flames, operating gas or electrical appliances).
Do not pierce and do not burn.
This appliance contains Y g (see the classification label on the back of the unit) of R290
refrigerant gas.
R290 is a refrigerant gas that complies with European environmental directives. Do not pierce
any part of the refrigerant circuit.
If the appliance is installed, operated or stored in a non-ventilated area, the room must be
designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or
explosion due to ignition of refrigerant caused by electric heaters, stoves or other sources of
ignition.
The device must be stored in such a way as to avoid mechanical failures.
The people who operate or work in the refrigerant circuit must have the appropriate
certification issued by an accredited organization that guarantees competence in the
handling of refrigerants according to a specific evaluation recognized by industry
associations.
The appliance shall be stored in a well-ventilated area in which the size of the premises
corresponds to the area of the room specified for operation:
Repairs must be carried out based on the recommendation of the manufacturing company.
Maintenance and repairs that require the assistance of other qualified personnel must be
performed under the supervision of a person specified in the use of flammable refrigerants.
Do not use a defective or inappropriate plug.
Do not use machines in the following situations
A: Close to the fire source.
2