Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4.12 Frequency Setting
This function allows you to choose desired frequency format 50Hz (for US) or 60Hz (for EU)
1. Press to access the menu, choose
and press
2. Press
and press
3. Navigate with
to select the desire frequency
4. Press to exit the menu
4.13 Volume Adjustments
•
Press the VOLUME UP/DOWN buttons (5) to increase/decrease the sound coming out of the parent unit.
NOTE: In normal use, it is recommended to set the volume at level 3 and below. Higher volume levels are intended for loud/noisy environments.
NOTE: If the volume on the Parent Unit is set too high and the Baby and Parent Units are close to each other, a high-pitched noise may be
heard (also known as feedback or static noise).
16
4.14 Night Light
This monitor features a night light integrated into the Baby Unit (22), allowing you to remotely activate a comforting glow to baby's room.
There are 3 light levels (from low to high) to choose from.
•
Press the
button on your Parent Unit to choose the desired light intensity.
NOTE: The Night Light status icon will be displayed on top of the LCD screen.
NOTE: Night Light feature can also be activated manually on the Baby Unit. Briefly press the PAIR button (28) on the bottom of the Baby Unit
to cycle between the intensity levels.
4.15 Zoom Mode
This baby monitor features two-zoom levels: x2 and x4.
1. Press the
button once to activate "x2" zoom option
2. Press the
button twice to activate "x4" zoom option
3. Press the
button again to exit zoom option
NOTE: This function is not available when SPLIT SCREEN mode is ON.
4.16 Switching between the paired Baby Units (Cameras)
NOTE: This function is only available when two or more cameras are paired.
•
To switch between paired cameras – briefly press the CAMERA SWITCH button (11) on your Parent Unit.
EN
17
Publicidad
