Tripp-Lite NFI-U05A Manual Del Propietário página 7

DIN-Rail Mounting and Dismounting Instructions
2. The switch can be wall mounted either vertically or
horizontally.
Mounting direction
with screw
Straight Direction Installation
Grounding the Switch
Grounding and wire routing help limit the effects of line noise
caused by electromagnetic interference (EMI). Run the ground
connection from the ground screw to the grounding surface,
then connect the ground connection from the terminal block to
the grounding surface prior to connecting devices.
ATTENTION: This switch is intended for mounting on a well-
grounded surface, such as a metal panel.
Mounting direction
with screw
Horizontal Direction Installation
7