FujiFilm 25x150MT-SX Manual De Instrucciones página 20

Usage Instructions
Adjusting the Interpupillary Distance (IPD)
1
Bring your eyes up close to the rubber eyecups of
the eyepieces.
2
Place your hands on the right and left prism boxes
and slowly move the binoculars tubes farther or
closer together to adjust the interpupillary dis-
tance until both the right and left fi elds of view
overlap to form a single circular image.
Adjusting Focus
Turn the focusing rings to adjust the focus of each lens one at a time until the viewing object ap-
pears clear and distinct.
* Repeat the same process to adjust the focus for a new object.
Adjusting Elevation
1
Loosen the elevation locking lever to release the lock.
2
Place your hands on the grips of the binoculars and move them vertically to achieve the
desired angle.
3
Once the desired angle has been set, lock it with the elevation locking lever.
Adjusting Azimuth
1
Loosen the azimuth locking lever (or in the case of
the 15x80MT-SX, the pan fi xing knob) to release
the lock.
2
Place your hands on the grips of the binoculars
and move them horizontally to achieve the de-
sired angle.
3
Once the desired angle has been set, lock it with
the azimuth locking lever (or in the case of the
15x80MT-SX, the pan fi xing knob).
* The turning positions of both the elevation locking and azimuth locking levers can be ad-
justed by pulling the lever outward and then rotating it to the desired position.
EN-7 ENGLISH