Water Temperature Too Hot Indicator; Add Salt Indicator; Quantity Dispensed Indicator - Tennant Orbio OS 3 Manual Del Operario

WATER TEMPERATURE TOO HOT INDICATOR

The water temperature too hot indicator is
displayed when the water supply to the machine
is too hot. Turn off the hot water and ensure there
is a dedicated cold water supply. Press the reset
button after changing the water supply to cold
water. System will not function until condition is
cleared.

ADD SALT INDICATOR

The add salt indicator is displayed when the salt
supply in the salt reservoir is low. Add salt to the
reservoir when the indicator is displayed. Refer to
Filling the Salt Reservoir in MAINTENANCE.
System will not function until condition is cleared.
OS3 DM20036 (3−2014)
OPERATION EN

QUANTITY DISPENSED INDICATOR

The quantity dispensed indicator displays the
amount of diluted solution generated in both liters
and gallons. The display will automatically
alternate between the liter and gallon equivalent
amounts. MultiSurface Cleaner is indicated in
blue, and MultiMicro 200 is indicated in yellow.
Touch the ready to dispense (home) screen to
access the quantity dispensed indicator.
11