Installation And Connection - Bosch HMT72G420 Instrucciones De Uso

Cooling with the appliance door open: Only leave the
■
cooking compartment to cool with the door closed. Do not
trap anything in the appliance door. Even if the door is only
slightly ajar, the fronts of adjacent units may be damaged
over time.

Installation and connection

This appliance is intended for domestic use only.
Place the table-top appliance on a solid, level surface (at least
85 cm above the floor). The ventilation slits on the appliance
must not be covered. The minimum height of the free space
above the surface of the appliance is 30 cm.
The appliance is ready to be plugged in and must only be
connected to a correctly installed earthed socket. The mains
voltage must correspond to the voltage specified on the rating
plate.
Only a qualified electrician may install the socket or replace the
power cable. The appliance plug must always be accessible.
Do not use multi-socket adaptors, power strips or extension
leads. Overloading causes a risk of fire.
18
Condensation in the cooking compartment: Condensation
■
may appear on the door window, interior walls and floor. This
is normal and does not adversely affect microwave operation.
To prevent corrosion, wipe off the condensation every time
you cook.
I n s t a l l a t i o n a n d c o n n e c t i o n