Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Operating instructions
b.
Before plugging in to operate the tool, you must check that it is possible to actuate
the Safety Switch correctly and that the switch returns to the "OFF" position
when you release the pressure on the Safety Switch.
c.
To start the tool, release the safety clip by pushing it backwards and push the Safety
Switch (Figure 7).
Figure 7
d.
To stop the tool, simply release the pressure on the Safety Switch. When plugging in,
ensure the Safety Switch is not activated (Figure 8).
Figure 8
e.
Hold the tool by the tool body and the vertical handle simultaneously.
f.
To obtain the best performance, ensure the MBX
correctly, see chapter 7.3. For a more detailed description of the function of
®
the MBX
g.
Always work with appropriate contact pressure. Excessive contact pressure will limit
the performance and cause damage to the MontiPower
12
visit
www.montipower.com.
®
MBX
ULTIMATE ELECTRIC
®
Belt is positioned and operated
®
®
MBX
Belt and tooth belt.
Publicidad
