Descargar Imprimir esta página

Briggs & Stratton BRUTE 020300 Manual Del Operario página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance
Maintenance Schedule
Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse
conditions noted below.
Maintenance Schedule - Fill in Dates as You Complete Regular Service
Maintenance Task
Pressure Washer
Check/ clean water inlet screen
Check high pressure hose
Check detergent siphoning tube/filter
Check spray gun and adjustable
nozzle extension for leaks
Check in-line filter
Prepare pump for storage below
32°F (0°C)
Engine
Check oil level
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Air cooling system
Clean combustion chamber
Prepare for storage
1
Clean if clogged. Replace if perforated or torn.
2
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change oil sooner when operating under dirty or dusty conditions.
3
Replace more often under dirty or dusty conditions.
General Recommendations
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any qualified
dealer for service.
The pressure washer's warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain the pressure washer as instructed in this manual,
including proper storage as detailed in Winter Storage and
Long Term Storage.
NOTE: Should you have questions about replacing
components on your pressure washer, please call
(800) 743-4115 for assistance.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
Service Dates
Every 25
Every 50
Before
Hours or
Hours or
Each Use
Yearly
Yearly
X
1
X
X
X
X
X
X
X
X
3
X
If unit is to remain idle for longer than 30 days.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.
NOTE: Once a year you should clean or replace the spark
plug, clean or replace the air filter, and check the spray gun
and nozzle extension assembly for wear. A new spark plug
and clean air filter assure proper fuel-air mixture and help
your engine run better and last longer.
Emissions Control
Maintenance, replacement, or repair of the emissions control
devices and systems may be performed by any non-road
engine repair establishment or individual. See Emissions
Control System Warranty in Warranties section.
Every 100
100-300
Hours or
Hours
Yearly
See Winter Storage
2
X
X
3
X
Service Dates
15

Publicidad

loading