Craftsman 12AVP2R3391 Manual Del Operador página 9

4. Reattach knobs or wing nuts (a) and carriage bolts (b)
removed in STEP 2 into lower holes of the handle or
lock the EZ-fold handle release levers (c) (Figure 8).
b
a
d
Figure 8
IMPORTANT: When locking the EZ-fold handle release
lever (c) ensure the position indicator (e) aligns with one
of three handle positions (f) (Figure 9).
c
Figure 9
5. Using the T-bolts (d) removed in STEP 2, secure the
lower handle to the handle brackets (Figure 8) and
tighten securely to secure the handle in place.
VERTICAL STORAGE HANDLE
1. Remove the four carriage bolts and nuts from the lower
handles (Figure 10).
Figure 10
ASSEMBLY
2. Unlock the two handle release levers. See inset, Figure
3. Ensure the lower handles are folded forward towards
c
4. Using the four carriage bolts and nuts removed in STEP
e
f
5. While stabilizing mower so it doesn't move, lift the
6. When lifting the upper handle ensure the position
7. Lock the two handle release levers. See inset, Figure 13.
8. Ensure all hardware is securely tightened.
9
11.
the front of the mower.
Figure 11
2, secure the upper handle to the lower handle. Tighten
hardware securely to secure the handle in place (Figure
12).
Figure 12
upper handle up (a) (Figure 13). Do not crimp blade or
drive control cables while lifting the handle up.
indicator (b) aligns with one of three handle positions
(c). See inset, Figure 13.
a
c
b
Figure 13