Descargar Imprimir esta página

LG LFNS22530 Serie Manual De Usuario página 13

Ocultar thumbs Ver también para LFNS22530 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Ambient Temperature
Install this appliance in an area where the tem-
perature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be ad-
versely affected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and in-
creased electricity consumption charges. Allow
at least 24 inches (61 cm) in front of the refrig-
erator to open the doors, and at least 2 inches
(5.08 cm) between the back of the refrigerator
and the wall.
24" (61 cm)
Removing/Assembling the
Refrigerator Door Handles
When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations
Removing the Handles
1
Loosen the set screws
(2.5 mm) Allen wrench and remove the handle.
2
Loosen the mounting fasteners
connect to the refrigerator door and handle
using a ¼ in. (6.35 mm) Allen wrench,
remove the mounting fasteners.
2" (5.08 cm)
Assembling the Handles
1
Assemble the mounting fasteners
both ends of the handle using a ¼ in.
(6.35 mm) Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. (2.5 mm) Allen wrench.
INSTALLATION
NOTE
12
with a 3/32 in.
that
at

Publicidad

loading