HOW TO USE
Before use
Clean the refrigerator.
shipping.
y Do not scratch the refrigerator with a sharp object or use a detergent that
y
Connect the power supply.
Check if the power supply is connected before use.
Read the "Turning On The Power" section.
Turn off the icemaker if the refrigerator is not yet connected to
the water supply. (Ice Maker installed only).
into the grounded electric outlet.
* This is applicable only to certain models.
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least two to three hours before putting food
cooling.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature lowers.
Open refrigerator doors and freezer drawers to ventilate the interior.
tape from inside the refrigerator and open the refrigerator doors and the freezer
drawers for ventilation.
CAUTION
tape or adhesive from the refrigerator,.
information on the rear surface of the refrigerator.
NOTE
CAUTION
Running the automatic icemaker before connecting it to the water supply
may cause the refrigerator to malfunction.
CAUTION
Putting food in the refrigerator before it has cooled could cause the food to
spoil, or a bad odor could remain inside the refrigerator.
HOW TO USE
26