Publicidad
Idiomas disponibles
Idiomas disponibles
1 - display showing the current temperature inside the cooler cabinet
2 - LED light indicating cooling mode
3 - LED light indicating defrosting mode
4 - temperature setting buttons
5 - SET button for setting the temperature
6 - button for illuminating the interior of the cooler cabinet
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%.
Place the unit in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm
from any wall of the unit. Keep the unit away from any hot surfaces. Always operate the unit on a
level, stable, clean, fireproof, and dry surface and out of the reach of children and persons with
impaired mental, sensory, and intellectual functions. Place the unit in such a way that the main plug
can be reached at any time. Ensure that the power supply to the unit corresponds to that specified
on the identification plate!
Before using the unit for the first time, disassemble all parts and wash them as well as the entire
unit.
3.3. Working with the device
Temperature setting:
Press the SET button, so the set temperature can be displayed.
By pressing the temperature setting buttons (4), set and save the displayed value.
Press the SET button to exit the settings and display the inside temperature of the cooler cabinet.
If no other button is pressed within 10 seconds, the current internal temperature of the cooler
cabinet will be displayed.
Backlight:
Press the interior lighting button of the cooler cabinet (6) to turn on the backlight. Pressing the
button again will turn off the backlight.
Manual defrost start/stop:
Press and hold the interior lighting button (6) for 6 seconds to start or stop defrosting.
Refrigerant LED light (2) :
During cooling, the LED light is on. When the temperature of the cooler cabinet is at a constant
level, the LED light is off. The LED light flashes when starting work.
Publicidad
