Powr-Flite Borelli Dual Pro Manual De Instrucciones página 12

OPERATION
Cleaning with On-Board Tools
This vacuum is equipped with on-board cleaning
tools including a metal telescopic wand, stretch
hose, dusting brush and crevice tool.
1. To use the cleaning tools, lift the hose handle
straight up from the vacuum
2. Extend the wand by pushing the button forward
and pulling the smaller wand out of the larger
wand
(Fig.2).
3. Attach any of the on-board tools to the end
of the wand or if you do not need the wand,
any tool can be connected directly onto the
hose handle.
MAINTENANCE
Always operate the vacuum cleaner
with a vacuum bag installed.
How to Change the Vacuum Bag
1. Unplug the vacuum cleaner. Remove
the bag compartment cover and
remove the used bag from the bag
holder
(Fig. 3).
2. Attach the new vacuum bag onto the
bag holder
(Fig. 4).
3. Pull the bottom corners of the new
vacuum bag
(Fig. 5).
4. Reinsert the tab on the end of the
bag compartment cover into the
groove on the bag compartment
housing. Press it into place and fasten
the bag compartment tightly
(Fig. 1).
(Fig. 6).
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 4
Fig. 6
12