Powr-Flite Borelli Dual Pro Manual De Instrucciones página 13

MAINTENANCE
How to Change Filters
Your Powr-Flite vacuum cleaner is equipped with an Pre-Motor Filter and a HEPA
Exhaust filter.
These filters capture fine dust particles and protect the motor from dirt.
It is important to replace the HEPA Exhaust filter approximately every six months.
To Change or Clean the Pre-Motor Filter
1. Unplug the vacuum cleaner. Remove the bag compartment cover and the bag.
2. Remove the Pre-Motor Filter and shake or brush off the dirt then replace filter.
(Fig.1)
3. Replace the bag and bag compartment cover.
To Change the HEPA Exhaust Filter
1. Unplug the vacuum cleaner. Remove the bag compartment cover.
2. Remove the HEPA Exhaust filter from the front of the bag compartment.
(Fig. 2)
3. Insert a new filter and replace the bag compartment cover.
Note: HEPA Exhaust filters cannot be washed and used again.
Fig. 1
Fig. 2
13