Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 MENU-OPERATED FUNCTIONES:
General:
•
You open the menu by pressing the MENU button.
•
Use
the SELECT button.
•
Use
press the SELECT button.
•
Finally press the SELECT button to save your setting
and press the VIEW button to close the menu (or wait
until the parent unit closes the menu automatically
after approximately 15 seconds). You can also use the
or
the SELECT button to close the menu.
Brightness:
1.
Press the MENU button and use the
scroll to the
2.
Press the SELECT button and use the
to decrease or increase the brightness.
Press the SELECT button to save your setting and
3.
press the VIEW button to close the menu.
See chapter 4.4 about automatically reducing the
brightness when the parent unit is powered only by
the battery.
VOX (automatically switching on/off):
When the baby is sleeping quietly and the baby unit is not
detecting any sound, you may have the display and sound
of the parent unit switch off automatically and switch back
on again as soon as the baby starts making noise.
You may set the sound level for switching the display and
sound back on as follows:
1.
Press the MENU button and use the
scroll to the
2.
Press the SELECT button and use the
to decrease or increase the sensitivity.
• 1 to 4 blue bars: the more blue bars, the higher the
sensitivity. Some trial and error may be required to
find the most suitable setting.
• 5 blue bars: the VOX function is disabled and the
display and sound are always enabled
3.
Press the SELECT button to save your setting and
press the VIEW button to close the menu.
or
to select the desired menu and then press
or
to select the desired option and then
button to select the
option.
option.
option and then press
or
or
or
or
button to
button
button to
button
35
Publicidad
