Publicidad
Idiomas disponibles
Idiomas disponibles
This product is a consumer laser product in accordance with
EN 50689.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Fence
(2)
Adjustable fence
(3)
Standard 47°, 45°, 33.9° and 22.5° bevel angle
stops
(4)
Scale for bevel angle
(5)
Angle indicator for right-hand bevel angle range
(6)
Locking screw for slide device
(7)
Spacer for slide device
(8)
Clamping lever for all bevel angles
a)
(9)
Speed regulator
(10)
Transport safety lock
(11)
Transport handle
(12)
Protective guard
(13)
Handle
(14)
Lock-off function for on/off switch
(15)
Laser protection cap
(16)
Retracting blade guard
(17)
Guide roller
Clamping screw for saw table extension
(18)
(19)
Mounting holes
(20)
Saw table
(21)
Insert plate
(22)
Locking clamp
(23)
Locking knob for various mitre angles
(24)
Mitre pre-setting lever
(25)
Tilt protector
(26)
Angle indicator for mitre angles
(27)
Detents for standard mitre angles
(28)
Scale for mitre angles
(29)
Saw table extension
(30)
Recessed handles
(31)
Holes for screw clamp
(32)
SDS bolt
(33)
On/off switch
Technical Data
Sliding Mitre Saw
Article number
Rated power input
No-load speed
Starting current limitation
Bosch Power Tools
(34)
On/off switch for laser (cutting line indication)
(35)
Laser warning label
(36)
Chip ejector
(37)
Slide device
(38)
Locking screw for the adjustable fence
(39)
Hex key (6 mm/4 mm)
(40)
Screw clamp
(41)
Depth stop adjusting screw
(42)
Depth stop
(43)
Spindle lock
(44)
Angle indicator for left-hand bevel angle range
(45)
Stop for standard 0° bevel angle
(46)
Chip deflector
(47)
Hex socket screw for mounting the saw blade
(48)
Clamping flange
(49)
Saw blade
(50)
Inner clamping flange
(51)
Threaded rod
(52)
Wing bolt
(53)
Laser beam outlet aperture
(54)
Length stop
(55)
Locking screw for length stop
(56)
Clamping screw for length gauge
(57)
Screws for insert plate
(58)
Set screw for laser positioning (right of the saw
blade)
(59)
Hex key (2.5 mm)
(60)
Set screw for laser positioning (left of the saw
blade)
Screw for laser protection cap
(61)
(62)
Fastening screw for laser mounting plate
(63)
Fastening screw for laser housing
(64)
Stop screw for 0° bevel angle
(65)
Stop screw for left-hand bevel angle range
(66)
Stop screw for right-hand bevel angle range
(67)
Set screws for mitre angle scale
(68)
Screw for mitre angle indicator
(69)
Hook-and-loop strap
a) Not available in all country-specific versions.
GCM 12 SDE
3 601 M23 1..
W
1800
–1
min
3300–4300
●
English | 33
GCM 12 SDE
GCM 12 SDE
3 601 M23 14.
3 601 M23 16.
3 601 M23 1B.
1800
1450
3300–4300
4000
●
1 609 92A 8L3 | (06.03.2023)
–
Publicidad
