Braun Silk-epil 7-521 Manual Del Usuario página 8

Our products are engineered to meet the
highest standards of quality, functionality
and design. We hope you thoroughly
enjoy using your Braun Silk·épil 7.
Please read the use instructions carefully
before using the appliance and keep
them for future reference.
Braun Silk·épil 7 has been designed to
make the removal of unwanted hair as
efficient, gentle and easy as possible.
The extra wide epilation head removes
the shortest hair (0.5 mm / 0.02 in) from
the root, leaving your skin smooth for
weeks.
Important
• For hygienic reasons, do not share this
appliance with other persons.
• When switched on, the appliance must
never come in contact with the hair on
your head, eyelashes, ribbons, etc. to
prevent any danger of injury as well as
to prevent blockage or damage to the
appliance.
Description
1a High frequency massage cap
1b Efficiency cap
2 Epilation head
3 Smartlight
4 Switch with lock keys (4a)
5 Charging light
6 Release button
7 Special cord set
8 Sensitive area cap*
9 Facial cap*
10 Shaver head with trimmer cap*
* not with all models (see page 3)
Charging
• Before use, charge the appliance.
For best performance, we recommend
that you always use a fully charged
appliance.
• Using the special cord set, connect
the appliance to an electrical outlet
with the motor switched off. Charging
time is approximately 1 hour.
8
• The charging light (5) flashes green to
show that the epilator is being charged.
When the battery is fully charged, the
charging light shines permanently.
Once fully charged, use the appliance
without cord.
• When the charging light flashes
yellow, reconnect the appliance to an
electrical outlet via the special cord
set to recharge.
• A full charge provides up to 40 minutes
of cordless operation time.
• Wet usage might reduce the operation
time. We recommend that you
recharge the appliance after each use.
• The best temperature range for
charging, using and storing the appli-
ance is between 59 °F and 95 °F.
In case the temperature is far beyond
this range, the charging time might be
longer whereas the cordless operation
time might be reduced.
Overheating protection
As a safety feature to avoid the unlikely
event of the appliance overheating, it
may happen that the appliance turns off
automatically. In this case, turn the
switch back to the position «O» (off) and
let the appliance cool down.
How to operate the appliance
Press one of the lock keys (4a) and turn
the switch (4) clockwise to position «I» or
«II». The Smartlight (3) shines as long
as the appliance is switched on. This
provides better visibility of fine hairs.
To remove the epilation head (2), press
the release button (6).
To change caps, press their lateral ribs
and pull off.
A Epilation
Epilation tips
If you have not used an epilator before, or
if you have not epilated for a longer period
of time, it may take a short time for your