Coby CSTV-130 Manual De Usuario página 7

Connections
There are four methods available for connecting the TV speaker, you
can use any of the
TV speaker to your desired audio source.
1.
Connect to the Optical port of the Dock through an optical cable
Step 1. Pull out and remove the rubber protector nubs on both ends
of the supplied Optical Cable.
Step 2. Connect the included Optical Cable to the Optical Port of the
Dock and to your TV's Optical Port.
Rubber
protector nubs
Step 3. Press the MODE Button on both the Speaker and Dock to sel
ect TV Mode, the TV LED Indicator on both the Speaker and Dock
will turn orange.
Step 4. Make sure the audio settings on your connected TV are set to PCM
or Optical audio format. Note: If your TV has the sound settings set to Dolby
or another format, your Speaker may not function properly. You must change
the sound output to PCM or Optical audio. Refer to your TV's user manual.
connection methods listed down to connect the
TV or DVD player
Optical Port
Optical Cable
EN 6
The Optical
Port of the
Dock